All Pakula Dojo Peche™ lures are pre-rigged with a stainless steel Dojo Hook made in Korea on high Quality Japanese full length leader to plus 7x7 wire from the hook to the back of the lure head. All rigs conform to IGFA regulations.
Aa part of the design there is an optional hook Lock called the Deadlock™.
All heads and skirts have been redesigned to offer better smoke trails, a much better profile to the fish and extra stability for ease of use. If you want to increase the lures action or aggressiveness simply trim the skirt 0.25in / 10mm at a time until you achieve the action you wish. Note you may have to re-rig the the lure to conform to local, club or tournament regulations.
Due to additives increasing the success of previous Pakula Lures™ all Pakula Dojo Peche™lures have double the amount of UV additives plus a new additive from Switzerland.
Pakula Dojo Peche™ Skirted Lure Deadlock™
All Pakula Dojo Peche™ lures are pre-rigged to conform to IGFA regulations as shown below. The crimp and leader are free to rotate within the lure head.
This is the standard method of rigging in most lures.
If there is a system to hold the rig in a desired position relative to the head there is normally an add on glued top the back of the lure head which is usually bulky and may interfere with the desired lure performance.
The Pakula Deadlock™ system is installed within the head during production so there is no need to add any bulk to the back of the lure head which may detrimentally affect the lures desired action and performance.
To use the Deadlock™ System support the hook around a pole or cleat so that if your hand slips you don't impale your hand on the very sharp Dojo™ Hook. Then position the head where you want it relative to the rig and while holding the leader tight push the head down onto the crimp. |
